BVVDF - E-100 (ADHESIVE)

  • MSDS: BVVDF
  • Manufacturer: PACER TECHNOLOGY
  • Product Name: E-100 (ADHESIVE)
  • National Stock Number: 8040-01-197-2993
Product Identification

Product ID:E-100 (ADHESIVE)
MSDS Date:01/02/1991
FSC:8040
NIIN:01-197-2993
MSDS Number: BVVDF

Responsible Party
PACER TECHNOLOGY
9420 SANTA ANITA AVENUE
RANCHO CUCAMONGA, CA 91730
US

Emergency Phone: 800-424-9300

Info Phone: 714-987-0550

Cage: 62530

Contractor
PACER TECHNOLOGY
RANCHO CUCAMONGA, CA 91730 US

Telephone: 909-987-0550

Cage: 62530

Ingredients

ETHYL CYANOACRYLATE

CAS: 7085-85-0

Fraction By Weight: 60-100%


POLYMETHYLMETHACRYLATE

CAS: 9011-14-7

RTECS: TR0400000

Fraction By Weight: 10-30%


HYDROQUINONE (SARA III)

CAS: 123-31-9

RTECS: MX3500000

Fraction By Weight: 0-1%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9394

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

LD50 LC50 Mixture:ORAL RATS LD50 = 12.2 CC/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:IRRITATES EYES, MUCOUS
MEMBRANES. CHRONIC:NO RESIDUAL EFFECTS OF ACUTE PROPERTIES.
Explanation of Carcinogenicity:MANUFACTURER GAVE NO COMMENTS OTHER THAN
THE ABOVE REFERENCES TO THE THREE LISTINGS.
Effects of Overexposure:TEARING FROM EYE IRRITATION AND MUCOUS
MEMBRANES WITH SOME COUGHING.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN, EYE &
RESPIRATORY DISORDERS MAY BE AGGRAVATED BY EXPOSURE.

First Aid

First Aid:REMOVE TO FRESH AIR. FLUSH AREAS OF CONTACT WITH WATER. WIPE
AWAY LIQUID ADHESIVE WHERE POSSIBLE WITH RESIDUALS BEING REJECTED
BY SOAKING IN WATER.

Fire Fighting

Flash Point Method:TCC
Flash Point:176F,80C
Lower Limits:NE
Upper Limits:NE
Extinguishing Media:FLUSH W/LARGE AMOUNTS OF WATER OR DRY CHEMICAL
EXTINGUISHER.
Fire Fighting Procedures:FUMES MAY BE IRRITATING IF NOT BURNING &
REQUIRE AIR SUPPLY SYSTEM W/GOGGLES WHILE APPLYING LARGE AMOUNTS OF
WATER OR DRY CHEMICAL.
Unusual Fire/Explosion Hazard:NONE. COMBUSTIBLE REQUIRING THE ABOVE
PROCEDURES.

Accidental Release

Spill Release Procedures:POLYMERIZE WITH WATER. SOLID MATERIAL MAY BE
SCRAPED FROM SURFACE. AVOID OVER EXPOSURE TO FUMES W/LARGE SPILLS &
POOR VENTILATION.
Neutralizing Agent:NO INFORMATION GIVEN BY MFR ON MSDS. HMIS:WATER

Handling

Handling and Storage Precautions:AVOID MOISTURE, DIRECT UV-SUNLIGHT &
DO NOT STORE ABOVE 25C (77F). KEEP CONTAINERS CLOSED TIGHTLY WHEN
NOT IN USE. IDEAL STORAGE IS AT 5-10C (41-50F).
Other Precautions:AVOID BREATHING VAPOR, CONTACT W/EYES & SKIN. DON'T
STORE AT -5C WHICH FREEZES PRODUCT TO USELESS STATE. PRODUCT NOT
DAMAGED BY FREEZING.

Exposure Controls

Respiratory Protection:NORMALLY NOT NECESSARY, A NIOSH APPROVED ORGANIC
VAPOR CANISTER MAY BE USED.
Ventilation:MECHANICAL:LARGE QUANTITIES USED TO 2 PPM. LOCAL
EXHAUST:TO ELIMINATE EYE IRRITATION.
Protective Gloves:VINYL (POLYETHYLENE) NON-STICKING
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS
Other Protective Equipment:NOT NORMALLY USED, HOWEVER, APRON PROTECTS
CLOTHING FROM HARDENED GLUE.
Work Hygienic Practices:SOAP & WATER HELPS REMOVE ADHESIVE FROM SKIN.
HMIS:USE GOOD CHEMICAL HYGIENE, AVOID ALL UNNECESSARY CONTACT.
Supplemental Safety and Health
MSDS ENTERED INTO THE HMIS BY DGSC AT REQUEST OF GSA.

Chemical Properties

HCC:N1
NRC/State Lic Num:NONE
Boiling Pt:B.P. Text:149F,65C
Melt/Freeze Pt:M.P/F.P Text:NE
Vapor Pres:1 MM
Vapor Density:NIL
Spec Gravity:1.05
Evaporation Rate & Reference:NIL
Solubility in Water:INSOLUBLE-REACTS
Appearance and Odor:TRANSPARENT WATER-WHITE TO STRAW COLORED LIQUID W/
STIMULATIVE ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
POLYMERIZED BY WATER, ALCOHOL, AMINES, ALKALINE MATERIALS & DIRECT UV.
Stability Condition to Avoid:EXCESSIVE HEAT ABOVE 176, MOISTURE AND
ALKALINES
Hazardous Decomposition Products:TYPICAL COMBUSTIBLE BY-PRODUCTS OF
CARBON MONOXIDE AND DIOXIDE
Conditions to Avoid Polymerization:STOR IN A COOL PLACE FOR BEST
PROPERTIES AND SHELF LIFE.

Disposal

Waste Disposal Methods:INCINERATE SOLID COMBUSTIBLE WASTE OR DUMP AS
CHEMICAL WASTE ACCORDING TO LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.